Tall Media Cabinet

Building Rustic Media Console

Rustic media console are important free furniture that adds a lot of aesthetic appeal to your modern living room. In addition to its aesthetics, can build a console table of its own save hundreds of dollars over what you would have paid on a furniture store. While the process may seem extremely difficult, it is actually quite simple if you follow the correct instructions.


Take four 28 “pieces of 2×4 wood and cut piece of MDF wood in a 15” x48 “piece using a circular saw. Use a pen to draw small marks in the 1 1/2” corners of the long side. Marks should be made a 2 1/2 “and 3 3/4” in from that point too. Drill control holes at all these points. Stand the rustic media console so that the arrow holes are facing you while placing an additional piece of MDF on the floor next to it. Take an extra piece of 2×4 “wood and place it flush with the table top and piece MDF. This piece of wood gives an accurate measurement of where your leg will go. Fasten two screws to the pilot hole to attach the first leg to the table top. Continue until all four I have been attached.

Cut two 2×4 “wood pieces at 10 1/8” long and two more in 41 3/4 “long time to act as support beams for the table. Slide one of the 10 1/8” pieces into one of the shorter sides of the table top between two of the legs. Drill two guide holes in the leg insert and screw this piece of wood between them. Repeat this step for the other side of the table. Place a 41 3/4 “piece of wood between the two pieces of wood you just attached. Drill two guide holes on both sides and screw them into the table. Repeat this step for all boards. Add a layer of bets or colors as desired. Too many is important not only looking to choose a console table but also works.

When shopping for a console table, there are a few things to keep in mind to help you decide which one would be the best in your home. Measure area where console tables will help you to limit possible sizes. Compare console board styles that offer the feature, but are minimal in size if you place it in a smaller walkway or hall. Half-moon table butt right against the wall with a straight edge and has a rounded edge. This type of table is perfect for home with young children, as there are no sharp corners that stick.